میکروکنترلر PIC16F616-I/P پکیج DIP

High-Performance RISC CPU:
 Only 35 Instructions to Learn:
 All single-cycle instructions except branches
 Operating Speed:
 DC – 20 MHz oscillator/clock input
 DC – 200 ns instruction cycle
 Interrupt Capability
 8-Level Deep Hardware Stack
 Direct, Indirect and Relative Addressing modes
Special Microcontroller Features:
 Precision Internal Oscillator:
 Factory calibrated to ±1%, typical
 User selectable frequency: 4 MHz or 8 MHz
 Power-Saving Sleep mode
 Voltage Range:
 PIC16F610/616: 2.0V to 5.5V
 PIC16HV610/616: 2.0V to user defined
maximum (see note)
 Industrial and Extended Temperature Range
 Power-on Reset (POR)
 Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
 Brown-out Reset (BOR)
 Watchdog Timer (WDT) with Independent
Oscillator for Reliable Operation
 Multiplexed Master Clear with Pull-up/Input Pin
 Programmable Code Protection
 High Endurance Flash:
 100,000 write Flash endurance
 Flash retention: > 40 years
Low-Power Features:
 Standby Current:
 50 nA @ 2.0V, typical
 Operating Current:
 20μA @ 32 kHz, 2.0V, typical
 220μA @ 4 MHz, 2.0V, typical
 Watchdog Timer Current:
 1μA @ 2.0V, typical
Note: Voltage across internal shunt regulator
cannot exceed 5V.
Peripheral Features:
 Shunt Voltage Regulator (PIC16HV610/616 only):
 5 volt regulation
 4 mA to 50 mA shunt range
 11 I/O Pins and 1 Input Only
 High current source/sink for direct LED drive
 Interrupt-on-Change pins
 Individually programmable weak pull-ups
 Analog Comparator module with:
 Two analog comparators
 Programmable on-chip voltage reference
(CVREF) module (% of VDD)
 Fixed Voltage Reference
 Comparator inputs and outputs externally
accessible
 SR Latch
 Built-In Hysteresis (user selectable)
 Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
 Enhanced Timer1:
 16-bit timer/counter with prescaler
 External Timer1 Gate (count enable)
 Option to use OSC1 and OSC2 in LP mode
as Timer1 oscillator if INTOSC mode
selected
 Timer1 oscillator
 In-Circuit Serial ProgrammingTM (ICSPTM) via Two
Pins
PIC16F616/16HV616 only:
 A/D Converter:
 10-bit resolution
 8 external input channels
 2 internal reference channels
 Timer2: 8-Bit Timer/Counter with 8-Bit Period
Register, Prescaler and Postscaler
 Enhanced Capture, Compare, PWM module:
 16-bit Capture, max. resolution 12.5 ns
 16-bit Compare, max. resolution 200 ns
 10-bit PWM with 1, 2 or 4 output channels,
programmable “dead time”, max. frequency
20 kHz