پروگرامر و دیباگر JLINK OB پشتیبانی از حالت SWD

پروگرامر و دیباگر JLink OB را می توان با استفاده از USB به کامپیوتر متصل کرد و در مد SWD میکرو را پروگرام نمود. این پروگرامر فقط در حالت SWD کار می کند و مود JTag ندارد.

میکروهای پشتیبانی شده:

ARM 9 11, CORTEX- M0 M1 M2 M3 M4 M5 A8 A9

مود ارتباطی:

SWD

نرم افزارهای پشتیبانی شده:

J-Flash ARM, Keil MDK ARM, IAR EWARM, CoIDE, mikroC PRO for ARM, nRFgo Studio

قابلیت ها و عملکرد:

برنامه ریزی: امکان برنامه ریزی FLSH ROM, EEPROM و ARM.

ویژگی های محصول:

1. سیستم 4 سیمه برای رابط کاربری: 4 سیم VCC, SWDIO, SWCLK, GND و سرعت بالای دیباگ و دانلود برنامه.
2. استفاده از رابط micro USB
3. استفاده از فیوز بر روی برد
4. پروگرامر در ابعاد فلش

Introduction:
J-Link- OB SEGGER developed by a separate set of emulator debugger downloader, generally designed to major companies Evaluation Board ( "on-board"), which is the reason for the suffix "OB" of. Entitled "J-Link- OB" The Simulation debugger with USB communication function, it can communicate with a PC, and the other end by SWD / JTAG mode and supports communication devices, complete debugging Simulation debugging tasks.

Objects supported:
all with SWD interface ARM7 9 11, Cortex- M0 M1 M2 M3 M4 A5 A8 A9 series of embedded microcontrollers.     
MCU vendors have to support the generation of ST (STMicroelectronics), Freecale (Freescale), nuvoton (New Tang Dynasty), NXP (NXP), TI (Texas Instruments) Cypress (Cypress), Atmel (Aite Mei Seoul), Analog (Analog), Fujitsu (Fujitsu), Toshiba (Toshiba) Energy Micro and the like.

Functionality:
programming functions: programming FLASH ROM, EEPROM, AFR and the like. 
Simulation capabilities: support running at full speed, single-step debugging, breakpoints, and other debugging method, you can view IO status, variable data. 
Programming Performance: USB2.0 interface, perform SWD download, download fast! 
Simulation performance: USB2.0 interface simulation debugging, single stepping, breakpoints, fast response!

Connection:
SWD mode

Supports IDE software:
J-Flash ARM, Keil MDK- ARM, IAR EWARM, CoIDE, mikroC PRO for ARM, nRFgo Studio

Features:
1, a simplified interface, four-wire system: VCC, SWDIO, SWCLK, GND four interfaces, complete high-speed debug and download. 
2, is fully compatible with the traditional J-Link, J-Link has all the features. 
3, using Mirco USB connector (the kind with the current smart phone), data lines common. 
4, 3.3V output, it can also power the target, user-friendly debugging and program download. 
5, on-board self-recovery fuse, to avoid a short circuit causing harm to make the board more secure. 
6, has a unique ID, debugging multiple devices simultaneously without conflict. 
7, the installation of a transparent heat shrink tubing, beautiful more intimate protection. 
8, stable, no firmware loss phenomenon. 
9, only U-disk size, simple circuit, stable, reliable, easy to move and carry.